Seven Benefits of Adding an Enclosed Sunroom onto Your Home

Do you have a patio that is exposed all day long to direct sunlight? Enjoying your patio is then not much fun, especially during the hot Texas summers! Even during the fall, winter, and spring months, the weather can still get rather hot and humid. Not to mention, there are pests of all sorts that can make spending time outdoors even less fun and exciting.

If you have a patio on your home but rarely use it for these or other reasons, you should consider this trendy patio design idea: Convert the patio into an enclosed sunroom! An enclosed patio not only makes it possible for you to fully utilize the entire space of your home by gaining additional living space but also to enjoy the outdoors without worrying about the weather or pests.

Read more

Concrete Driveways: More Durable and Economical Than Asphalt

So, you are in need of a new driveway in Houston because your current one is worn out. One of the most important things you will need to consider is what material you want to use for your new driveway. Most homeowners choose between asphalt and concrete.

While some homeowners do choose asphalt, concrete is becoming a more popular option for several reasons. From being an eco-friendly choice to long-term savings, concrete can be the perfect choice for the new driveway for your Houston home.

Read more

How Houston HOAs Ensure Homeowners Rectify HOA Violations

Homeowner associations (HOAs) were created in communities to help manage the upkeep and appearance of the shared common areas, such as streets, sidewalks, community pool, and so on. In addition, they may include certain services like trash pickup, recycling, and lawn mowing as part of the HOA provided services for the community.

HOAs also ensure each homeowner in the community maintains their property according to the community guidelines and standards. This can include limiting what types of exterior changes are allowed, whether one can install a fence, and other such aspects. For instance, an HOA could require a homeowner to maintain their driveway and keep it in good condition.

Read more

When Is It Time to Replace of Old Concrete Driveways and Patios?

Concrete driveways and patios can last quite a long time with the right maintenance and care. Eventually, they still do wear out and need to be replaced. Typically, you can expect to get between 20 to 30 years out of your concrete patio or driveway. As your driveway or patio starts to age, it will show signs that it could need to be replaced.

Read more

Why Design Your Concrete Patio or Driveway Project This Winter?

Since the weather in Houston is very unpredictable, it can be difficult to get much done on the outside of your home. However, that does not mean you cannot gear up for spring and summertime projects by developing your designs in the winter.

Two types of projects you can plan now are concrete patios and driveways. Even if the weather is freezing cold outside, you can still start making preparations now. Once it warms back up and temperatures are steadier, then you will be ready for your Houston concrete contractors to get to work.

Read more

How Long Should You Wait Before Sealing Your Concrete Driveway?

After getting a new concrete driveway poured, one thing our Houston concrete contractors highly recommend is having your new concrete driveway sealed. Driveway concrete sealer helps to protect and preserve the appearance of your new driveway by reducing the risk of small and large cracks. This means that your driveway will last a long time. Most concrete driveways, if properly cared for and maintained, can last as long as 25 years.

What You Need to Know About Concrete

Concrete is a mixture of water, cement, and either gravel or sand. It has to be mixed carefully using the right amount of each material. Mixing processes help ensure the concrete can be poured and smoothed easily. The mixing process also helps with the curing process, which is where the concrete gradually hardens so it is solid and strong.

Unsealed concrete is porous and can absorb various types of liquids such as water and oil. Depending on the type of liquid, it can cause the concrete to become discolored and stained. The fluids will also cause unsealed concrete to gradually start to deteriorate and break down. This can lead to chipping and concrete driveway cracks.

Why Wait to Seal Concrete?

While it can be tempting to apply driveway concrete sealer right after it is poured, this is never recommended. There is excess moisture in the concrete that needs to evaporate during the curing process. The total curing process normally takes about a month before the concrete is solid and ready to be sealed.

If you were to seal the concrete any sooner, it would create a barrier and prevent the excess moisture from evaporating correctly. As a result, the newly poured concrete driveway would not be as strong as it should be. In addition, the concrete would be more prone to breaking and cracking. Furthermore, the concrete could become uneven as the concrete would not be able to settle correctly.

Sealing Process

The sealing process is pretty straightforward once your new concrete driveway has fully cured. It is a good idea to verify it is properly cured by having it inspected with a follow-up visit from our Houston concrete contractors.

    • Clean the concrete driveway.

You want to make sure to clean the driveway before sealer is applied. Otherwise, anything left on the driveway will be sealed into the concrete and could lead to staining and discolorations. Debris could also lead to small cracks, which can overtime become larger cracks. To clean the driveway, start by sweeping it off with a broom to remove leaves, dirt, and other debris.

Next, take a garden hose and nozzle and spray off the driveway to remove any remaining dust and dirt. If there are stains in the concrete that have started to appear, you will want to get these removed. You may use a pressure washer to help remove stains, but you do need to be careful to avoid damaging the concrete by not holding the end of the power washer wand too close to the cement.

Once the driveway has been cleaned, you need to let any water on the concrete dry fully before the sealant is applied. Normally, during a bright sunny day, it only takes between two and four hours for the driveway to dry.

    • Choose the right concrete sealer.

There are several different types of concrete sealers. Some are designed to help protect against staining. Others are designed to enhance the appearance of the concrete and have a glossy finish. There are even penetrating concrete driveway sealers that are a mixture of materials to provide multiple benefits, like stain protection and high-gloss finish.

If you plan on sealing your driveway yourself, you should avoid sealants from general retailers. These products may not be as superior as the sealants you can get from your local concrete contractor.

    • Apply the sealer to the driveway.

There are different application methods you can use to seal the driveway. You could use a brush and “paint” the sealer on. This method can take a very long time to complete, especially if you have a large or long driveway.

Another method you could use is to roll the sealant onto the driveway. This method is faster than brushing. Rolling the sealer on also provides a more even finish and better sealant coverage.
The easiest and fastest method to use is spraying the sealer onto the driveway. Spray sealing does provide an even finish and allow you to apply the right amount of sealant.

Regardless of which method you decide to use, the sealant should be applied until it starts to turn a light white color. This signifies a nice coating of the sealant to ensure the concrete is properly protected.

    • Allow the sealant to fully cure and dry.

It is equally important to allow the sealant to fully cure and dry for at least 24 hours before walking on, driving over, or parking vehicles on the driveway. After the sealant has dried, you will want to inspect the entire driveway to verify there were no spots missed.

It is easy to see any spots you missed since there will be a color variation from the sealed section and unsealed section. If you find any unsealed areas, apply sealant to these and allow the area to cure and dry for 24 hours.

After Care and Maintenance

Applying_sealant_concrete

Once your driveway has been sealed, you will need to care for it properly. You should sweep off any dirt, leaves, and debris on a regular basis. You can also use your garden hose and garden nozzle to spray it off.

However, you should not power wash the driveway, as this can remove the sealant. Sealing that has been washed away increases the risk of concrete driveway cracks. If you spill anything other than water on the driveway, it is important to clean up the spill right away to prevent it eating through the sealant and staining your driveway.

Depending on the type of sealant used, it will need to be reapplied periodically. Most sealants will last about two years but can vary based on the type of sealant used and the amount of traffic and wear.

Why You Need a Professional to Seal Concrete

The steps required to seal your new concrete driveway are not always something everyone can do on their own. Our Houston concrete contractors can include driveway sealing as part of your new driveway installation so you will not have to worry about doing it the first time.

If there is staining or any other issues, our team will take care of any necessary driveway repair before applying sealant. Not to mention, we already have access to the equipment and sealants required to seal your driveway.

Common Mistakes People Make When Sealing Their Driveways

The biggest mistake people make when they want to seal their driveways themselves is applying the sealant too soon. They do not wait until the driveway is fully cured. This mistake ends up costing in the long run because their new driveway will not last as long and can develop large cracks and other problems, which have to be repaired.

Another mistake people make when sealing old concrete is not cleaning their driveway before applying the sealant. When dirt, dust, and other types of debris are trapped under the sealant, it affects the performance of the concrete. Leaves are especially notorious for staining concrete if they are not cleaned off ahead of time.

Another issue that arises is when choosing the right sealant for an old concrete driveway. If you do not select the right one, it may not provide the right protection you require for your concrete driveway. For instance, if you just apply a glossy sealant, it may not have stain protection.

Last, not caring for your driveway after it is sealed can be a common mistake. The sealant does eventually wear off and need to be reapplied. If sealant is not reapplied at the right intervals, the concrete is no longer protected.

As you can see, these mistakes can be quite easy to make. This is why our concrete patios and driveways company recommends having us install and seal your new concrete driveway, as well as take care of any repairs and resealing you need.

If you’re ready to get rid of your old concrete driveway, we’re the company for you. Our concrete experts know the ins and outs of removing old driveways and laying new concrete for a fresh and sturdy driveway. For further information about our concrete driveway and patio services, please feel free to contact Cross Construction Services at 713-244-8509 today!

Construction 101: What You Need to Know About Your Concrete Driveway

The concrete driveway on your home is designed to provide years of use with the right care and maintenance. Even with the best care and maintenance, though, eventually your driveway will wear out and you will want to replace it with a new concrete driveway installed by your Houston concrete contractors.

Let’s take a look at the life of a concrete driveway so you can get a better idea about everything you need to know.

Read more